St Michel use clip hinges which require only light finger pressure to clip into place and allow the
doors to be easily removed for access to plumbing fittings.
To move the doors sideways in total
or to level each door, turn screw
A
clockwise or anitclockwise.
DOOR ALIGNMENT
Your doors have been adjusted in the factory on a level surface to achieve matching height,
equal gap and surface alignment. Before you adjust the doors, ensure again that the vanity
is level and true and not twisted. When level, if the doors still do not align, adjustment can
be made to the hinges as follows:
HINGE
ADJUSTMENTS
St Michel Industries Limited, PO Box 21 122, Henderson, Auckland. Phone 09 837 4276. Fax 09 837 4325
A.
SIDE ADJUSTMENT
To move the door inward or outward
from the carcass - loosen the hinge
arm fastening screw
B
and slide in
the direction you want to go.
Retighten hinge arm fastening screw
B
.
B.
DEPTH ADJUSTMENT
Loosen the top and the bottom
screw
C
on each mount plate, adjust
and retighten.
C.
HEIGHT ADJUSTMENT
General Installation
Information
5
06/12
