St. Jude Medical Merlin home EX1100, Руководство пользователя

Страница: 6 / 20

2
transmitter, a telephone line is not needed.
The Merlin@home™ transmitter plugs into your telephone line, see Setting Up the Transmitter
(page 3), and uses the telephone network to send information to the server, where your clinic can
view the information. Before your Merlin@home session starts, you must hang up all phones. If
someone calls during your session, you receive a Can't Send Information message. For more
information, see the Merlin@home Transmitter Quick Start Guide provided with your transmitter.
When the transmitter is not reading or sending information, it is idle. Leaving the transmitter
connected to your telephone line does not affect your telephone's normal operation. You can still
make and receive calls.
Note
At any time during your Merlin@home session, you can interrupt your session to use
the telephone. If you do not hear a dial tone when you pick up your telephone handset,
hang up and pick up your telephone handset again. If your Merlin@home session is
interrupted, the transmitter may display a Can't Send Information message. If so, press
the Start button and the transmitter will attempt to send your information at a later time.
To use the Merlin@home™ transmitter, your telephone service provider must support touch-tone
dialing. You must use a push-button telephone with a standard (RJ-11) plug. Your telephone wall
jack must also accept a standard (RJ-11) plug. If you have an older plug or jack, you can
purchase an RJ-11 adapter that allows you to use the transmitter.
Note
•
If your telephone is wired into the wall, you cannot use the transmitter unless
you install standard telephone wall jacks. To do this, contact the telephone
company for help.
•
If DSL shares your telephone line, contact your DSL service provider for a
filter to prevent any possible interference. Plug the filter into the telephone
wall jack and plug the phone connector into the filter. For more information
on how to use the filter, contact your DSL service provider.
CAUTION
The transmitter is designed for use with direct analog telephone lines. It may be
damaged by any other type of phone line. See Technical Support (page 6).
Using your Merlin@home™ Transmitter with a Cellular
Adapter
The Merlin@home™ transmitter model EX1100 and the Merlin@home™ transmitter model
EX1100W can be used with the cellular adapter provided with your transmitter. For more
information, see the Set Up Guide and Quick Start Guide provided with your transmitter.
Using your Merlin@home™ Transmitter with a Wireless
Broadband Kit
The Merlin@home™ transmitter model EX1100 and the Merlin@home™ transmitter model
EX1100W can be used with a wireless broadband kit. For more information, see the Set Up Guide
provided with your transmitter.