St. Jude Medical Axium Скачать руководство пользователя

Страница: 33 / 36

Appendix I: Troubleshooting

Pop Up Message

Possible Solution

Connection with your Stimulator was lost.

Please reconnect.

• Move your Programmer over your Stimulator to

establish connection and reconnect to the device.

•

If you still have difficulty connecting, bring your

Programmer closer to your Stimulator and

continue to move the magnet over your Stimulator.

• Move to another location, as there may be

interference in your current location.

Unable to connect to your Stimulator.

Please contact your physician during normal

business hours.

• Hit “OK” and try to reconnect to your Stimulator.

• Contact your doctor during normal business hours

if the problem does not go away.

Unable to connect to your Stimulator. Please

try again.

• Move your Programmer over your Stimulator to

establish connection and reconnect to the device.

•

If you still have difficulty connecting, bring your

Programmer closer to your Stimulator and

continue to move the magnet over your Stimulator.

• Move to another location, as there may be

interference in your current location.

Your Stimulator battery is low. It will need to be

replaced soon. Please contact your physician

during normal business hours.

• Contact your doctor during normal business

hours to set up an appointment. Your battery has

reached the Elective Replacement Interval (ERI).

Your Stimulator battery needs to be replaced.

Stimulation has been turned OFF permanently.

Please contact your physician during normal

business hours.

• Contact your doctor during normal business

hours to set up an appointment. Your battery

has reached End of Service (EOS) and will not

stimulate until it has been replaced.

Stimulation for one or more leads has been

turned OFF. Please contact your physician

during normal business hours.

• Move your Programmer over your Stimulator to

establish connection and reconnect to the device.

• Go to the Pain Control screen and turn on the lead

that has been turned off.

• If it does not allow you to turn it back on, contact

your doctor during normal business hours.

All stimulation has been turned OFF. Please

contact your physician during normal business

hours.

• Contact your doctor during normal business hours.

Stimulation has been turned OFF due to a

magnet. Please use your Programmer to

restore stimulation.

• Move your Programmer over your Stimulator to

establish connection and reconnect to the device.

• Go to the Pain Control screen and turn on each

lead one at a time.

Содержание Axium





































Результаты поиска

Содержание Axium

Отзывы:

Похожие инструкции для Axium

Бренды по названию

Популярные бренды

St. Jude Medical Axium, Руководство пользователя

Результаты поиска

Содержание Axium

Отзывы:

Похожие инструкции для Axium

Бренды по названию

Популярные бренды