IMPORTANT
Installer and users please note:
Please read the en re instruc on manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
PRODUCT SAFETY
Prior to the installa on of this product, the installa on instruc ons should be read and completely
understood. The installa on instruc ons must be read to prev ent personal injury and. Keep these
installa on instruc ons in an easily accessible loca on for future reference.
CAUTION: the maximum load capacity for the unit is 15kg (screw fi ed) and 7.5kg (adhesive pad); max
load per individual mop clamp is 2.5kg. Exceeding the maximum load capacity may cause injury.
Do not install on a structure that is prone to vibra on, movement or chance of impact.
CAUTION: Before installa on, a full survey of the moun ng area must be conducted, to ensure that it
is suitable for the weight of the bracket and is free from pipes, electric cables or any other obstruc ons.
FITTING INSTRUCTIONS
A - ADHESIVE PAD FITTING
1.
Gently remove an end-cap hook from the aluminium rail
2.
Slide the adhesive pads into the track on the rear of the rail and replace the end-cap hook
3.
Space the pads evenly across the rail and remove the film from the pads
4.
Posi on the mop holder in the required loca on and affix using the adhesive pads, press the pads
firmly into the surface and take care to expel any air bubbles that have formed under the pad
B – SCREW FITITNG
1.
Locate the 2x fixing holes in the recessed part of the aluminium track (note, it may be easier to
remove an end cap and slide all the components out the rail – they can then be replaced in any order
required)
2.
Posi on the mop holder in the required loca on and use these fixing holes to mark drilling loca ons
on the wall (use a spirit level to achieve a level fi ng)
3.
Pre-drill the wall and (if required) fit rawl plugs
4.
Fix using appropriate screws
USAGE INSTRUCTIONS
Simply push a mop handle (pole diameter 18-30mm), held ver cally, into the holder and the
silicon grip will ‘lock’ the mop in place. To remove, simply pull the mop away from the wall.
CLEANING INSTRUCTIONS
The holder should be cleaned periodically with warm water and mild detergent.
SERVICE WARRANTY
Electrovision guarantees the product free from defects in materials and workmanship for a period of 1
year. Should this unit be used under condi ons other than those recommended, or any a empts made to
service or modify the unit, then the warranty will be rendered void. The product you buy may some mes
differ slightly from illustra ons. This warranty is in addi on to, and does not affect, your statutory rights.
If you have any problems with this product, please call our help desk on (0845) 459 4816.
Electrovision Ltd
. Lancots Lane, Su on, St. Helens, Merseyside, WA9 3EX
www.Electrovision.co.uk
