ST 500 "Piranha" Operation Manual: Wired Receiver Channel
40
Fig.36
In fig.36:
1 - active channel
2 - pair of wires connected
3 - pairs of wires
4 - direct voltage on wire pairs
5 - alternating voltage on wire pairs
6 - current table row
Functionality:
selecting a paired combination of wires
analyzing signals in the selected pair
electronic switch setup
Controls:
Key
Action
table row selection (selecting a pair of wires to be tested)
ENTER
activating "PANORAMA" mode
ESC, MODE
switching to the main menu of device
FUNC
activating "ELECTRONIC SWITCH SETTINGS" mode
F1 - F4
disabled
To select a pair of wires, use the
to set the table cursor to the corresponding row
in the table. When the "ENTER" is pressed, the "PANORAMA" mode will be turned on and a
panorama of the range loading in the selected pair of wires will be displayed on the screen.
