A. With one person on either side of the vehicle place the
WP3-RZ3O+2A into location from the underside of the cage.
Plug in the 4 pin speaker output from the main
unit WP3-RZ3O4A into the 4 pin speaker input
on the WP3-RZ3O+2A, and then secure to the
cage using the zip ties provided.
C. Once the enclosure is centered side to side, press the bracket
toward the center of the vehicle and tighten the brackets using
the #3 screwdriver. NOTE: After all brackets are tightened,
it may be necessary to go back and re-adjust the brackets to
ensure the enclosure is properly secured.
B. While holding the enclosure securely toward the main WP3-RZ3O4A,
loosely install the 2 brackets using the screws provided.
WP3-RZ3O+2A
WIRING INSTRUCTIONS
INSTALLATION INSTRUCTIONS
A
B
C
© 2018 SSV Works, Oxnard, CA 93030 WP3-RZ3O+2A Rev. A 2-21-18
