CORPORATE: SSV WORKS, 201 N Rice Ave, Unit A, Oxnard, CA 93030
Phone: 1-818-991-1778 Web: www.SSVworks.com
The installation of the enclosure portion is now complete, Step 10 begins the wiring
10)
Cut the power/ground cable to length, be sure to leave enough wire at the battery location to wire to the
battery, strip back approximately 4 inches of the black tubing to expose the red/black wires inside
11)
Strip back 1/4"-1/2" of wire to make your connections
12)
Crimp the supplied fuse holder onto the end of the RED wire and attach to the battery "+" terminal
13)
Crimp the supplied ring terminal to the BLACK wire and attach to the battery " -" terminal
Your connections are now complete, refer to the user guide for proper use of the system.
