G. Insert the rear tab of the speaker pod into the notch on the vehicle,
then lower into place
E. Remove the headrest by lifting from the front
H. Re-install gas cap nut (driver side only). Re-install gas cap (driver
side only). Re-install screws in the front of the speaker pod (2 places).
Re-install headrest frame.
F. Drill an opening for the speaker pod harness in location shown
SS-B65
G
E
H
F
© 2016 SSV Works, Oxnard, CA 93030 SS-B65 Rev. A 12-29-16
For proper sound, ensure the speaker polarity is correct connect the “+” to the “+” and the “-“to the “-“from the speaker wire to the amplifier. If using
with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information.
WIRING INSTRUCTIONS
“+”
“+”
“-”
“-”
Amplifier
