SS-B65
Polaris Slingshot
Behind Seat 6.5” Speaker Pod
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against
defects in material or workmanship. All SSV Works Electronics are covered by
a limited 1 year warranty against defects in material or workmanship. All SSV
Works Speakers are covered by a limited 1 year warranty against defects in
material or workmanship. Labor for replacement of defective components is
not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- T25 Torx driver
- T40 Torx driver
- 2.5mm Hex driver
- 5/8” Drillbit
A. Use a T25 Torx driver to remove upper screws from the headrest
frame (2 places).
C. Use a 2.5mm hex driver to remove screws from the front of the
headrest pod (2 places).
B. Use a T40 Torx driver to Remove lower screws from the headrest
frame (4 places). Remove headrest frame.
D. Unscrew and remove gas cap and gas cap nut (driver side only).
A
C
B
D
