16
B
A. Starting at driver side footwell, remove the factory T40 torx
screw as shown. Save this screw for Step D.
B. Place the driver kick pod into location so that both vehicle
screw bosses line up with kick pod brackets.
A
D
C. Using (x2) #14 screw loosely secure the kick pod to the factory
screw bosses.
D. Re-use the factory T40 torx screw previously removed in
Step A to loosely bolt through the lower kick pod bracket to
vehicle panel. Once all three screws are in place go back and
re-tighten.
C
E. Connect the B-H1909 cable to both passenger and driver side
speaker pods and zip tie all cables to the frame.
E
G. Repeat Steps A-F to install passenger kick pod.
F. Connect the B-H1909 speaker harness to the 800.5 amplifier
front output.
F