SSV Works GN-5K, Руководство пользователя, Страница: 18 / 28

18
C. Using a ¼ drill bit, drill holes for mounting of kick Pods .
E. Use the provided M6 screws and washers and loosely tighten
the pod in place through the drilled holes. Once all screws
have been loosely installed, tighten down by hand.
F. Route the speaker wire away from any moving parts and any
sharp metal, then connect to the amplifi er.
C
E F
D. Place enclosure in location for mounting.
D
A. Cut out the INSIDE template (Driver/Passenger) along the cut
line. Position the template on kick panel above the foot rest
making sure to line up arrows on template to the curves of the
panel as seen on image A.
B. Using a scribing tool, mark the center of the 3 drill points
illustrated on the template as shown on image B.
A B