SSV Works GN-5A, Руководство пользователя

Страница: 26 / 28

26
C
E
G
D
F2 F1
C. Place the bottom edge of the kit on dash.
E. Pull the MRB3 Power and Ground wires through the Rubber
grommet and feed through to the power strip located on the right
side of the vehicle.
G. Make the connection to MRB3 Brain.
D. With both thumbs press the top corners until the kit snaps
into place.
F. At the Bus Bar terminal located under the hood, unscrew the nut on the
second position terminal and attach the black Ground wire. Refasten the
nut. Then connect the yellow Power wire to either the constant terminal
(F1) or the accessory terminal (F2). Refasten the nut.