7
LED displays and their meaning
Red LED lights continuously.
The master card has not been read
in, the ELM is still in its default
status.
Red LED lights continuously but goes
out a
fter 15 seconds.
Then the green LED lights up continu-
ously.
The ELM was in the programming
mode and switched after automatic
timeout to the operating mode.
Red LED lights continuously.
When passing an EK/EKC in front,
the green LED flashes for 1 second.
The ELM is in the programming
mode. The gre
en LED EK confirms
read-in of a EK/EKC.
Red LED lights continuously.
When passing an EK/EKC in front,
the red LED goes out, the green LED
lights continuously.
With the master card, you have
switched the ELM over to the
operating status.
Green LED lights continuously.
ELM is in operating status.
Green LED lights continuously.
When passing an EK/EKC in front,
the green LED flashes for 3 seconds.
ELM is in operating status.
The user key EK/ the user card EKC
is executing the required function.
Green LED lights continuously.
When passing an EK/EKC in front,
the red LED flashes for 3 seconds.
ELM is in operating status.
The user key EK/ the user card EKC
has not been read in. (no control
entitlement)
Green LED lights continuously.
When passing an EK/EKC in front,
the green LED goes out, the red LED
lights up.
You have switched the ELM into
the programming mode with the
master card.
Green and red LEDs light up alternately
for 90 seconds,
then the green LED
lights continuously.
After a cut in the power supply, the
ELM has returned to the operating
status.
Green and red LEDs light up alternately
for 90 seconds
, then the red LED lights
continuously.
After a cut in the power supply, the
ELM has returned to the default
status.
sequence and thus entitled to trigger
the switching output of the ELM.
As
a confirmation of ea
ch user key/
card read-in process, the green LED
flashes after around 1 second.
Termination of the read-in pro-
cess
The read-in process is terminated
by passing the master card in front
of the ELM again, or automatically
by a timeout function which cuts
in 15 se
conds after the last user
key/card has been read in. After
completion of the read-in process,
the green LED on the front of the
ELM lights u
p, so indicating the
operating status.
Cancelling individual users
It is not possible to cancel indi-
vidual users in stand-alone opera-
tion. Reading in the master card
f
or 15 seconds will c
ancel all the
entered users at the ELM.
To confirm
the completed cancellation proce-
dure, the red LED
flashes for 3 sec
-
onds. It is then possible to restart
the read-in process of individual user
keys/cards. The cancellation process
does not affect the master card.
If the as-delivered status is to be
established, i.e. a new master card
is also to be created, then the BCD
rotary switch located behind the
inspection shaft cover with the green
dot must be set to the “0” position
and then back to the “1” position
(live).