Basic status
Own call number
13
The display changes continuously
between
and
“0“ = do not activate basic status
“1“ = activate basic status
Use the R button to scroll for-
wards
Use the F button to scroll back-
wards
Basic status
If you activate the basic status by
entering “1“ and then leaving
the programming mode using the
C button, all menu points of the
appliance are turned to their
basic, i.e. factory settings. All that
remains unaltered is the set call
number.
Remark:
The basic factory settings are list-
ed on page 5.
Note:
If a unit is reset to its basic status,
any personalized code word you
may have entered is replaced by
the default factory-set code word
”1000”. Correct this if necessary.
Basic status
Pres. extn: 0
1 = yes, 0 = no
Pres. extn: 0
OWN CALL NUMBER
Pres. extn: 04
Display
Enter the required code number
Use the R button to scroll for-
wards
Use the F button to scroll back-
wards
Own call number
If you wish to change the call
number of an appliance, enter
the new call number (1-99). If the
newly entered number already
exists in the same bus, the R and
F buttons for scrolling backwards
and forwards are disabled
until this has been corrected.
If you terminate the program-
ming routine with the
C button despite having entered
the same number twice, after
a reset the system once more
requests correction of the call
number. Using the C button, initi-
ate another reset process
after correcting the number.
F
R
1
0
F
R
