SSS Siedle DCIP 740-0 Скачать руководство пользователя страница 7

7

IP
Internet Protocol 

The IP is a network protocol in 
widespread use in computer 
networks. IP forms the first layer of 
the Internet protocol family which 
is independent of the transmission 
medium. This means that computers 
can be grouped within a network 
into logical units known as subnets 
by means of an IP address and 
subnet mask.

IGMP V3

The Internet Group Management 
Protocol is based on the Internet 
Protocol (IP) and permits IP 
multicasting (group communication) 
in the Internet. IP multicasting is the 
distribution of IP packages under 
an IP address to several stations 
simultaneously. Here, it is possible to 
specify which source is required for 
the multicast stream.

IWA
Interface Working Address

 

Six-digit address with which the 
system interface video server 
SIVS 600-... addresses the PC users. 
These IWA addresses are stored in 
the Software Client.

LAN
Local Area Network

 

Local, cable-linked network.

Monitor assignment

Up to 254 Siedle Multi door stations 
can be assigned to a maximum 
of 4 different PC users. This 
operating mode is only possible with 
DCIP 740-... .

Multicasting

Term to denote group/parallel calls 
with video image to several PC users 
which have the Software Client 
installed. For this to be possible, the 
UDP and IGMP V3 protocols must be 
implemented in the network.

Push to Talk

In case of a connection using the 
half-duplex mode (push to talk) a 
button always has to be pushed to 
change the speech direction.

Router

A router is a network device which 
links several computer networks. 
Network packages of a protocol 
arriving at the router are analysed 
for information and forwarded or 
routed to the intended destination 
network.

RS232

Designation for a serial interface, for 
instance the COM interface of a PC.

RS485

Interface for serial data transmission 
in the half-duplex mode. 
Transmission to a pair of cores. 

Server

A server is a program which waits to 
be contacted by a client program, 
after which it exchanges data with 
the client program. The hardware 
on which the server runs is known 
as the host.

Subnet mask

The subnet mask, also known 
as network mask, is a bit mask 
which separates an IP address into 
a network and a device or host 
section. It is used in IP networks in 
order to make routing decisions.

TCP
Transmission Control Protocol 

The TCP is a protocol which 
determines the way in which data 
is exchanged between computers. 
All operating systems in modern 
computers have TCP capability and 
use this protocol for data exchange 
with other computers. The protocol 
is a reliable, connection-oriented 
transport protocol used in computer 
networks.It is part of the internet 
protocol family, which forms the 
foundation of the Internet.

UDP
User Datagram Protocol

 

The UDP is a minimal connectionless 
network protocol which belongs to 
the transport layer of the Internet 
protocol family. It is the task of the 
UDP to assign data transmitted via 
the network to the right application.

Vario bus

Various different input and control 
units can be connected to the Vario 
bus. It comprises 4 cores. The Vario 
bus is a RS485-bus. The information 
will be transfered on the Vario bus 
protocol.

Web browser

Software for the display and 
indication of Internet pages or 
corresponding configuration pages.  
E.g. Internet Explorer or Firefox.

Содержание DCIP 740-0



































Отзывы: