6
GENERAL OPERATION
Turn Unit On/Off
Press the power ( ) button to turn the unit on or off.
Adjust Volume (VOL)
Rotate the
VOL
knob on the front panel or press the
VOL+/-
buttons on the remote control to
Change the Source (SRC)
Press the
SRC
button to switch between RADIO, DISC, USB, CARD and AUX-IN modes.
Reset System (RESET)
The
RESET
button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted,
or when any of the controls are disabled. To reset your system,
press the
REL
button
to release the control panel from the chassis and remove the control panel. Next, use a thin
object with a pointed end to depress the
RESET
button, located behind the control panel on
the main chassis.
Adjust Menu Options (SEL)
•
Press the
SEL
button repeatedly to cycle through the following adjustable audio
functions: VOL, BASS, TREBLE, BALANCE, FADER, EQ OFF, LOUD, DX and STEREO.
•
Press and hold the
SEL
Set the Clock (CLK)
1. To display clock time, press the
CLK
button.
2. To set clock time, press and hold the
CLK
button and the hour will
3. Press the
I<<
or
>>I
button or press the
NEXT
or
PREV
button to adjust the hour.
Press the
I<<
or
>>I
button or press the
NEXT
or
PREV
button to adjust the minutes.
4. Press the
CLK
button and the minutes will
5.
6.
During Bluetooth mode, the clock can not be adjusted.
button to access these additional functions: VOL (LAS/ADJ),
AREA EU/US, Clock 12/24, and BEEP ON/OFF.
