1.3 Maintenance and Cleaning of Discs
Disc Maintenance
1. To
h
1.
Do not use petrel, thinner. commercially cleaner or anti-static spray can
damage the unit.
keep the disc clean, andle the disc by its edge, do not touch the disc
surface of the play side.
2. Do not stick paper or tape on the disc. If there is glue (or analog) on the
disc surface, must wipe it up before using.
3. Do not expose the disc to direct sunlight, or nearby heat sources such as
caliduct, or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.
4. Put the disc inside disc case to keep temperature after finishing playback.
Before playing, wipe the disc with a clean lint. wipe the disc outwards from
the disc center.
2.
Disc Cleaning
1.4 Battery Information of the Remote Control
Replace Battery in the Remote Control
Note about the Battery of the Remote Control
:
:
1.
3.Do not short the battery.
4.Do not throw the battery into the fire.
5.To avoid the risk of accident, keep the battery out of reach of children.
1.Before using the remote control for the first time, pull the insulating
sheet out of the remote control as the direction indicated by the
arrow.(see fig.1)
2.Press the movable block hold as the direction indicated by the A arrow
(See fig.2), then pull the battery holder out of the remote control as
the direction indicated by the B arrow(see fig.2).
3.Replace the old battery by a new battery with (+) polarity side upward.
(See fig.3).
4.Insert the battery holder to the original position in remote control.
(See fig.3).
Improper use of battery may cause overheating or explosion. so that
Result in injury or fire .
2.Battery leakage may cause damage to the remote control(Battery
Life: 6 months with normal use in normal room temperature).
Fig.1
Fig.2
Fig.3
A
B
+ side up
7. The Trouble Shooting
Please read t he use r
’
s ma nual carefully befo re using the DVD player. If you have a ny troubles
in using this p layer, try to solve the problems by the suggestions mentioned below. If you can
not rem ove th e trouble after using all the suggestio ns, ple ase contact the company or the
technical service ce nter authorized by us. For the sake of your safety, please do not open the
cover and rep air the playe r by yourself , if that, it may cause electric shock.
NO PICTURE, SOUND AND IND ICATION
* Ensure that the power switch is on.
* Ensure that the wall inlet is ok .
* Ensure that the power cord is not da maged or the fuse i s not blown.
* Ensure that the power plug is connected to the inlet tightly.
NO SO UND BUT HAVE PICTURE
* Ensure that the player
’
s audio output has a good connection with monitor
’
s audio input.
* Check whether th e audio connector is dam aged.
* Check whether you have turned dow n the volume.
* Ensure that you have set the r ight AUDIO setup of the p layer.
* Ensure that the audio is not under m ute.
NO PICTURE BUT HAVE SOUND
* Ensure that the player
’
s video output has a good conne ction with monitor
’
s video input.
* Ensure that you have tu rned your monitor to the AV input channel connecting to your player .
* Check whether th e vide o connector is damaged.
* Ensure that you have set the r ight VIDEO setting s of th e player.
BLACK AND WHITE PICT URE OR SCREEN ROLLING
* Ensure that you have set the r ight TV SYSTEM (e.g. PAL, NTSC) setting.
F LAWS OF PICTURE OR SOUND
* Check whether th e setting of AUDIO is right.
* Check whether th e disc is scratched or sta ined.
* Check whether th e AV connector and the output terminal is stained.
* Check whether th ere is conde nsatio n insid e the Lens. If so, leave the play er off for an hour
or so, then try again.
* Check whether th e installation angle is less than 30
.
DISPLAY NO DISC OR BAD DISC
* Ensure that you have put the disc on the tray.
* Check whether th e disc is put in the reverse side.
* Check whether th e disc is dist orted.
* Check whether th e disc is stai ned or scratched b adly.
* Ensure that the disc format is compatible to the player.
* Ensure that the temperature inside t he car is not too high. If so, cool off till the ambient
temperature retur ns to normal.
* Replace another disc to insert it into the disc compartment.
REMOTE CO NTROL IS INSENSITIVE OR DOES NOT WORK
* Check the batteries of remote control and make sure that they are to be powerful and
good conductivity.
* Direct the remote control to th e IR sensor of the player.
* Check whether th ere are some obstacles betwee n the r emote contr ol and IR sensor.
SOME FUNC TION BUTTONS DO NOT WORK
* Turn off the power, then turn on aga in.
* Reset the unit to zero, then turn on again.
* Remove th e front panel from the unit, then install it again and then turn on again.
T HE RADIO DOES NOT WORK
* Check whether th e antenna cable is connected firmly. Or man ually t une fo r a sta tion.
°
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com