OPERATION
6
16. EQ
Press the EQ button to choose a desired preset equlizer mode:
OFF, CLASS, ROCK, POP, FLAT.
11.FF( ) &12.FB( )
In the radio mode:
Long press the or button for more than 2 seconds, the unit will switch to manual tuning
mode, briefly press the or button to search the next or previous frequency step by step.
Short press the or button, the automatic search will start, it will search upward or downward
for the strong signal radio station within the cuttent band. The auto searching will stop until find a
station.
19.
15. MUTE
17. USB PORT
18. AUX IN JACK
20. RESET
To reset all parameters to factory default values. Press the button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET
hole.
flash on the LCD
detach
13.BAND
14.AMS
In radio mode,short press the
BAND
button repeatedly to select the one of the radio band : FM 1, FM2,
FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1
、
F2
、
F3 for FM band,
and A1
,
A2 for AM band will be shown on the LCD display.
preset station in each band.
AMS
button to scan each
Press the
AMS
check
Press the
AMS
button to enter track search mode, the “TRK0000” will appear on the display.
Rotate VOL knob to select the “first number”. Then press the button to move the “first number” to
the left and enter the next number. Finally press the SEL button to confirm and play the selected track.
If no any operation in 5 seconds,it will play the current track.
When the 6 strongest stations will be stored into
In the USB mode:
Briefly press the or button to play the the next or previou track.
Press and hold the or button to fast forward or fast backward.
In radio mode:
In USB playback mode: