Page 5
During radio mode:
1)Press the BAND button briefly to select the radio broadcasting band you woul d
like to hear. The AM/FM band is toggled cyclically through the tuning bands:
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
2) Press and hold for more than 1 second, the radio searches from the current
frequency and checks the signal strength level until 6 station are found.
And then the 6 stations frequency are preset to the corresponding preset
memory numbered bank. The auto-storage operation is implemented in the
each selected band. When the auto-storage operation is finished, the radio
execute the Preset Scan.
Press the CH-/CH+ to select the storage radio.
During MP3 file in disc, or USB mode:
Press BAND to turn to TRACK SEARCH mode, the LCD will display TRK T 000
and flash the biggest digit 0 that the USB Flash Drive contain. (if the number of
tracks is less than 100 and more than 9, it will be TRK 00)
Then rotate the VOL knob to select the number of the flashing digit from 0 ~ 9.
Then press SEL button to confirm the number and flash next smal ler digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number.
Press the MODE button to change among tuner (radio), disc (when a disc is
loaded), USB (when an USB Flash Drive is inserted) and AUX mode.
During disc, USB mode:
1) Press the TOP/ >|| button briefly to interrupt the playback of the disc, USB.
Press again to resume normal pl ayback.
Press the TOP/>|| button and hol d for approximately 0.5 seconds to play the
first track of the disc, USB.
2) Press the RPT button once to play the current track repeatedly, press twice
to play the current folder repeatedly, press thrice to play in random order,
press fourth to play each track for first 10 seconds part, press again to turn
off above function.
3) Press the -10 and +10button to move up and down10 tracks at a time.
When the remained total tracks i s lack of 10, the both buttons are inactively.
Press the DISP button briefly to display time for 5 seconds on the display, and
then returns to its previous display unless the button is pressed again.
Then press the DISP button and hold for more than 1 second until the real time
flashes on the display. Then you can adjust HOUR or MINUTE by rotate the
VOL knob.
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
10. BAND BUTTON
11. MODE BUTTON
12-15. TOP/>||, INT, RPT, RDM BUTTONS
16.DISP BUTTON
17.AUX INPUT JACK
Page 6
18.USB PORT
19. RESET BUTTON
In order to play the file in the USB Flash Drive, turn over the plastic cover cap then
insert the USB Flash Drive into the USB Port. The system will change into the
USB mode automatically, and then play the first file in the USB.
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
DASHBOARD
METAL MOUNTING SLEEVE
UNIT CHASSIS
PLASTIC TRIM RING
FRON T PANEL
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
NOTE
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
Remove the two s crews that protect
the CD player during transp ortation
before operating the player.
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it click .
“
”
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com