SSI Single Gas Analyzer for H2, Руководство по эксплуатации

Страница: 32 / 44

Single Gas Analyzer (SGA)
Operations Manual
Super Systems Inc. Page 32 of 44 Page 32 of 51
Network Configuration
The Network Configuration page allows you to view network settings and change certain
settings as well. SSi recommends consulting an IT engineer or network administrator before
changing any of these settings.
Figure 6 - Network/Board Configuration Page
The first two fields on the page show the MAC address and Host Name. The MAC address
should not be changed. The Host Name can be changed as needed.
To enable dynamic assignment of IP addresses, click on the Enable DHCP checkbox. Dynamic
assignment means that the unit’s IP address on the network will be assigned automatically,
preventing IP address conflicts. The network must support dynamic IP assignment in order for
this to work.
If Enable DHCP is not checked, IP and other settings can be changed manually. These settings
should be verified with your network administrator before being changed. Failure to do so could
result in IP conflicts and other network issues.