INS-TSSHC-3DNPSB-16A-115F-1210
6
5. Take the wires from the wall through the hole at the base
of the thermostat and connect them using the supplied
solderless connectors. When making the connection with
aluminum wire, make sure that you are using connectors
identified CO/ALR. Please note that the thermostat wires do
not have polarity. Therefore, the way they are connected is
not important.
Four-wire installation
6. Reinstall the front part of the thermostat on the mounting
base and tighten the screw at the bottom of the unit.
7. Turn on the power.
8. Set the thermostat to the desired setting (see the following
section).
Installation work and electrical wiring must be done
by qualified person(s) in accordance with all applica
-
ble State/Country codes and standards.