SRS Lighting DTA16, Инструкция по эксплуатации

Страница: 3 / 8

( 3 / 8)
DMX input and output connections
Male and female DMX standard 3- or 5-pin XLR connectors are located on the
front panel. DMX input is optically isolated.
Device description
Front panel:
1. DMX input
2. DMX output
3. Switch DMX start address (UP = ON)

#1-9 are allocated for DMX start address selection 1-256

#10 is TEST mode activation. In this mode, the outputs runs
in sequence 1-16 automatically 0/+10V.
4. LED indication

POWER ON ON when device is powered

DMX OK ON when correct DMX is received

DMX OK BLINKING when test DIP is activated

DMX ERR ON when DMX with inversed polarity is
detected
Rear panel:
1. SUB-D output connector
2. Power supply