SRS Lighting DST8-DIN Series, Инструкция по эксплуатации

Страница: 4 / 8

( 4 / 8)
Device in use:
By default, Power LED indicates the device is on main power. If there is no power light present,
please check the main power input. If the DMX cable is connected to the device, LEDs marked as
D+ and D- go on for side marked as DMX input, thru and this indicates that DST8 is receiving the
DMX signal. Speed of light on these LEDs also indicates the refresh rate of DMX signal. Fast
blinking – high refresh rate, slow blinking – slow refresh rate.
There are 8 optically isolated outputs that retransmit the DMX input signal. If any of data LEDs is
off, unplug the signal cable corresponding to this output and check the cable for short circuit
between D+ and CMN or D- and CMD lines.
Should there be any problem, please do not hesitate and contact us at
sales@srs-group.com or
+421244681417 and stay calm. SRS Light Design will certainly help you fix all the problems.