background image

 

( 4 / 4) 

Technical data 

 

Main input: 

AC 100-255V / 50-60Hz / 15W 
 

Input/Output: 

2x USITT DMX512 
10x USITT DMX512 amplified 

 
Size:

 

1U, 19’’ format / 482,5 x 44,5 x 130 mm  

 

Weight: 

2.1 kg 
 
 
 
 

DECLARATION OF CONFORMITY 

According to guidelines 89/336 EEC and 92/31 EEC: 

 
Name of producer: 

SRS Group s.r.o. 

 
Address of producer: 

Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic 

 
Declares that the product 

 
Name of product: 

10-way DMX splitter with RJ45 connectors 

Type

: DSR10ABN 

 
Corresponds to the following product specifications: 
 

Safety: 

EN60065, resp. EN 60950 

EMC: 

EN55103-1, resp. EN55103-2 

 
Additional information: 
 

Unit and all connected apparatuses must be earthed via main cable.  
 
Bratislava, 10 May 2009 
 

 
 

 

 

 

 

 

 

 

 
Robert Sloboda 

 

 

Copyright 2017 SRS Group, s.r.o. | Specifications subject to change without notice.

 

Document: DSR10ABN_en_manual_M065 | Version 1.0 | Actual as of: 19 June 2017

 

 

SRS Group s.r.o.

 

Rybnicna 36/D | 831 07 Bratislava | Slovakia 

 

Phone: +421 2 44 681 417 | Fax: +421 2 4468 1419 

 

Email: [email protected] | www.srs-group.com

 

Package consists of: 

 

DSR10ABN,  

 

1.5m 3G0.75mm2 PowerCon 

cable,  

 

Printed manual 

 

 
Warranty: 

 

Life-time warranty 

 

Содержание DSR10ABN

Страница 1: ...nformation about the installation and the use of the equipment Please read and follow these instructions carefully Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work DSR10ABN_en_manual_M065 10 way DMX Splitter with A B Line Selection DSR10ABN ...

Страница 2: ...nsation forms on the equipment It should never be placed near or over a heat register or other source of heated air and it should not be installed or operated without proper ventilation DMX connections DMX 3 5 pin or RJ45 connectors are located on the front panel of the device They are separated into two groups The 1 st group is marked as inputs A and B This line should be terminated by the termin...

Страница 3: ...tion LEDs being off mean no incoming signal The termination LEDs are on when the termination switch is activated The desired DMX source to be retransmitted on each output can be selected using the A B switches close to the output connectors When the DMX cable is connected to the device all LEDs marked as D D or the sign of signal polarity go on This indicates that DSR10ABN is functioning properly ...

Страница 4: ...0ABN Corresponds to the following product specifications Safety EN60065 resp EN 60950 EMC EN55103 1 resp EN55103 2 Additional information Unit and all connected apparatuses must be earthed via main cable Bratislava 10 May 2009 Robert Sloboda Copyright 2017 SRS Group s r o Specifications subject to change without notice Document DSR10ABN_en_manual_M065 Version 1 0 Actual as of 19 June 2017 SRS Grou...

Отзывы: