( 3 / 16)
Functions and Control
RMC hoist controller was designed to control up to 12 (RMC-12) electrically compatible motors either
separately or simultaneously; via DIGITAL cable remote or locally on the RMCseries base unit.
All electrical components carry their own individual CE certification and comply with European
Directives. The components are housed in a robust steel 19" rack case with powder coating.
Operation
The Motors/Hoists connected to the MCseries controller can be activated either individually or
simultaneously using the GO button located either on the corresponding RMCseries controller base
or on the remote controller.
How to start
•
Connect the Main plug to the 230V AC power supply /on MCseries controller this is marked
as an “AUX” output/
•
Connect the Remote connector to the MCseries controller
•
Connect Remote2/E-stop connector to the MCseries controller
•
Select type of operation LOCAL / REMOTE using the KEY switch
•
Check if the emergency STOP button is not engaged
•
Engage the gear lever corresponding to each motor to the required position:
o
UP - Lever in upper position
o
STAY – Lever in middle position
o
DOWN - Lever in lower position
•
Pushing the GO button will activate the motors that will move simultaneously
•
Releasing the GO button will simultaneously cease the movement of the motors
•
When the device is not being used, it is highly recommended to turn it off using the key
switch or the STOP button
To Move a Single Motor:
•
Set the UP/DOWN toggle switch for the motor to be moved to the desired direction. The
associated LED will light green for UP and red for DOWN.
•
Hold the GO button until the motor has moved to the desired height and release.
To Move Several Motors:
•
Set the UP/DOWN toggle switches for each motor to be moved to the desired direction.
Every associated LED will light green for UP and red for DOWN.
•
Hold the GO button until the motors have moved to the desired height and release.
