9
Specifications
Frequency Response:
20 Hz – 20 kHz (+/- 1 dB for analog out) (L, R, C, Ls, Rs,
Cs, Ls); 20 Hz to 80 Hz (LFE)
Inputs (digital only):
4 balanced XLRs (L/R, C/LFE, Ls/Rs, Cs); input level per
AES3 standards
Input
Impedance:
110
Ω
Digital Outputs:
1 balanced XLR (Lt/Rt); output level per AES3 standards
Digital Output Impedance:
110
Ω
Analog Outputs:
2 balanced XLR (Lt & Rt) @ +4 dBu nominal output level;
+24 dBu maximum output level; pin 2 hot per AES3 standards
Analog Output impedance:
50
Ω
Dynamic Range (Analog out):
>110 dB Typical (A-weighted)
Distortion (THD) (Analog out):
<.005% THD Typical (A-weighted) at maximum level
D-A Conversion:
24 bits
Sample Rates:
44.1 kHz or 48 kHz (locked to input sync source sample
frequency)
Encoding Latency:
<8.2 ms
Processing:
SRS – Circle Surround II Encoding algorithm on ADI DSP
Input signal presence @ -44 dBFS (1 LED per
channel); Clip indicator @ 0 dBFS
Front Panel Indicators/Controls:
Sync Source Selector – AES Pair 1/AES11 Clock &
status LEDs
Sample Rate Indicator – 44.1kHz/48kHZ status LEDs
AES Status Indicator – L/R, C/LFE, Ls/Rs, & Cs status
LEDs
Bass Manage Mode selector – Bass Manage Mode
button & status LED
Test Mode Selector – Test Mode button & status LED
(Cycles encoded pink noise through all channels at
-10dBV to be decoded by the CSD-07 or CSD-07D)
Output Signal Level meters (11 LEDs per channel); 3
dB steps with clip indicator @ 0 dBFS (+24 dBu Analog)
Power Requirements:
Auto-switching 100-240VAC, 47-63 Hz
Power Consumption:
8 W
Dimensions:
Rack mount; 1 ru (1.75” x 19” x 12”)
Weight:
5 lbs. 10 oz.
Optional Equipment:
SRS CSD-07 or SRS CSD-07D Decoder for monitoring
Recommended Cable:
Double Shielded (Foil/Braid) AES/EBU cable. Nominal
impedance 110
Ω
(Ex. Belden 1696A)
Note: 0 dBu = 0.775 Vrms
(Specifications subject to change without notice)
Содержание CSE-07D
Страница 8: ...7...
