SRK Electronics FMA501, Руководство пользователя

Страница: 24 / 33

SRK Electronics FMA501 manual
 2007 SRK Electronics Pty Ltd 23
Remove the 10 screws holding the board to the PSU and gently lift out.
To remove the PSU, commence by turning the amplifier rear panel frontward and removing
the remaining screws holding the rear panel in place.
Gently pull the rear panel away to expose the mains wiring.
Undo the earth stud to free up the various earth wires.
Pull the blue wire off of the IEC socket and the brown wire which goes to the power supply off
of the circuit breaker.
The rear panel should now be free.
Remove the PSU from the side panel by removing the four screws holding it in place.
The PSU should now be free.
All the sub-assemblies should now be free of the chassis. Further disassembly should be self
evident.