SRC SRC-56P, Инструкция по эксплуатации

Страница: 3 / 6

Update: 2019.SEPT Page 3 of 6
Characteristic
- Powerful durable, high speed production tool
- Longer stroke, could set up rivets with longer body in one time
- Minimized noise
- Machining part, imported seals, enhances tool life
- Ergonomic
- Light Weight, reduces operator fatigue
Technical Parameter
： ： ： ：
Capacity
：
Ф4.0- Ф 6.4 (5/32”~1/4”) for aluminum and steel blind rivets &
Ф4.0- Ф 4.8 (5/32”~3/16”) for stainless steel blind rivets
Stroke
：
20mm
Pull Force
：
10.0KN
Air Pressure
：
5-7bar
Weight
：
1.50kgs
Air Supply Requirement
- All tools are operated with compressed air at the range of 3~7Kgf/cm2 (45~105psi).
- We recommended the use of pressure regulators and filtering systems on the main
air supply. These should be fitted within 3 meters of the tool to ensure maximum
tool life and minimum tool maintenance.
- Air supply hoses should have a minimum working pressure rating of 150% of the
maximum pressure produced in the system or 10 bar, whichever is the highest.
- Air hoses should be oil resistant, have an brasion resistant exterior and should be
armoured where operating conditions may result in hoses being damaged.
- All air hoses must have a minimum bore diameter of 6.4 millimeters or 1/4 inch.