Copyright By SRC
Design and Specification are subjected to change
Page 5
General Instructions
1
. We request you to pay attention to the Mounting Instructions in this document
and follow the step-by-step procedures.
2. This Mounting Instruction manual is a “Do It Yourself” (DIY) fitment manual of the
Accessory part to the Vehicle. We have prepared this based on our experience and
knowledge, related to the Vehicle, Part and its functional aspects.
3. SRC cannot guarantee the interchangeability of the parts to any other
manufacturer’s accessory part. It is advised to the User, to inspect and ensure the
original state of all other Vehicle parts.
4. We request you to bear in mind, that the Installed part can change the driving
behaviour and/or the stability during driving or any other dynamic conditions.
5. If you have the appropriate tools and another person to assist you in the
mounting, it will help.
6. After Completion of the Mounting and before taking on a First ride, Ensure and
Check all functions of the Vehicle. It is always advised to check loosening of the
fasteners after the first 50 kilo meters of ride and at regular intervals.
7. To the maximum extent possible, our design use the current Mounting/Fitment of
the Original Equipment, so that Installation of these accessories will not affect the
Payload or Function of the Vehicle or the Part on which it is mounted to protect it
8. If any additional modifications are to be done, prior to the fitment of the
accessories, it will be explicitly specified in the instruction sheets
