24
End Cap Installation
E n d C a p I n s t a l l a t i o n
The procedure for end cap installation is the same for disc brake 76D, 77D, and rim brake 76, and 77 hubs. The 77D disc brake and 77 rim brake hubs
are pictured.
Spray isopropyl alcohol on a rag and clean the axle and end caps.
Install the quick release or thru axle end caps by pressing the end
caps onto the axle of the hub by hand.
N OT I C E
Ensure the o-ring is in the groove on the internal surface of the end
cap. Ensure there is no grease on the o-ring or internal surface of the
end cap or axle. Grease may cause the end caps to move.
This concludes service for Zipp 77D/76D and 77/76 front hubs.
1
