Model SR775L
Service Manual - S/N 1035+
Part No. MAN775L_100929
Page 4 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2010
S
Instruments, Inc.
ASSEMBLY
STEP 1
: Unpack the scale system and check parts
against the
PACKING CHECKLIST
. If there are
any missing or damaged parts, call the local sales
representative.
STEP 2
: Verify that the serial number on the Display
Assembly (1) and the Base Assembly (3) match.
IMPORTANT
: All of the scale systems are calibrated
at the factory as a complete system. Components
should not be interchanged with other systems.
STEP 3
: (Figure 1) Place the Mast
Assembly (2) onto the Base Assembly as
shown.
Note
: Be sure to put Display
Assembly Cable Connector (7) through
corresponding hole in Base Assembly.
STEP 4
: Insert the four 3/8” Flats Socket
Head Cap Screws (5) provided, to attach
the Mast Assembly to the Base Assembly.
STEP 5
: Gently position the scale system
TEP 6
:
Plug the Display Assembly Cable Connector
following
loor.
on its side. Loosen the battery compartment
cover screws to open the Battery
Compartment Cover (6) (Figure 2).
S
(7) into its mate in the battery compartment.
STEP 7
: Insert the six (6) “D” cell batteries
directions on the Battery Compartment Cover. Close and
securely screw the Battery Compartment Cover into place.
STEP 8
:
Gently return scale to an upright, level position
on the f
#
PART NAME
1
Display Assembly
2
Mast Assembly
3
Base Assembly
4
Ramps
5
Flat Socket Head Cap Screws (4)
6
Battery Compartment Cover
7
Display Assembly Cable Connector
Figure 1: Scale Assembly
Figure 2: Battery Compartment Cover
1
3
4
2
5
6
7
