Model SR585
i
Bariatric Stand-On Scale
Operating and Service Manual
Part No. MAN585
i
-KG_MICROBAN_201006
Page 7 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY (Cont’d)
INSTALLING OPTIONAL HEIGHT BAR ASSEMBLY
STEP 1:
Remove the round plug from the top left of the Display Unit. Insert the Height Bar
Assembly into the hole in the Display Unit.
Ensure the Height Bar Assembly seats correctly in the
Base
Assembly
(Item 3, Figure 1)
.
NOTE
: It may be necessary to loosen the four (4) 3/8 – 16 flat head Mast Base Assembly
mounting screws (Item 4, Figure 1), to allow movement of the Mast for insertion of the Height Bar
Assembly into the Base Assembly.
STEP 2:
After Height Bar Assembly installation re-tighten the four (4) 3/8 – 16 flat head Mast
Base Assembly mounting screws.
STEP 3:
Tighten the two (2) Allen screws into the Display Unit to secure the Height Bar
Assembly to the scale.
REPLACEMENT PARTS and ACCESSORIES
Part #
Description
FRGSM06U09P1J
Medical Grade AC Power Supply
SR9110-CM
Height Bar Assembly (Optional)
SR8220
Printer Kit (optional; contains all printer parts listed below)
FRAP1300
Printer
FRAP1300BR-01
Printer Mounting Bracket
SE8294
Printer Cable
FRAP1300BP01
Rechargeable Battery Pack
FRBC1300
Printer Battery Charger
FRTP130012C
Paper, thermal printer 58mm (10 Rolls)
MF8205
Printer Mast Bracket
