www.sraquaristik.com
Installation Instructions
page 3 of 8
STEP 6
Place the perforated bubble diffuser
lid into position, the non-perforated
portion of the lid should be directly
over the pump output, tighten the
white screw hand tight.
STEP 7
Reposition the skimmer cone over the white screws, turn the skimmer into position
by rotating clockwise, hand tighten the white screws keeping the skimmer in
position.
Make sure that the cord coming from the pump is not crimped, it
should fit easily into position through the notch in the skimmer base.
Do not over tighten!
