Form FVC 020 - Rev. 1
REFER TO FIGURE 1 FOR THE FOLLOWING STEPS:
Step 1: Apply Teflon tape or sealant on the male pipe threads of mating part, and place handwheel in full open position.
Step 2: Install valve and tighten to desired position, taking caution to not overtighten.
Installation of New or Repaired Globe or Angle Valves
Safety Tips for Shut-down and Storage
SAFETY TIPS FOR SHUT-DOWN AND STORAGE WHEN TANKS ARE NOT IN USE:
Step 1: Make sure all valves are closed with any exposed outlets / inlets capped to keep out debris and moisture, which will help to
prevent condensation or corrosion of internal parts.
Step 2: Store tanks in accordance with federal, state, and local codes and manufacturer’s instructions. Check periodically for leakage
or excessive pressure build-up. Make corrections or repairs as necessary.
