LED CYC LIGHT 48x3W RGBA
4
projector. If you lack these qualifications, do not attempt the installation yourself, but
instead use a professional structural rigger. Improper installation can result in bodily
injury and/or damage to property.
Use only professional trussing systems if the Item shall be lowered from the ceiling
or high joists. Never let the Device swing freely in a room.
Caution: Overhead Items may cause serious injuries when crashing down!! If there
is concern about the safety then DO NOT INSTALL the Device!!!!
DANGER OF FIRE!
When installing the device, make sure there is no highly-inflammable Material
(decoration articles, etc.) within a distance of min. 0.5 m.
Mount the projector with the mounting-bracket to your trussing system using an
appropriate clamp.
For overhead use, always install a safety-rope that can hold at least 12 times the
weight of the fixture. You must only use safety-ropes with quick links with screw cap.
Pull the safety-rope through the hole in the mounting-bracket and over the trussing
system or a safe fixation spot. Insert the end in the quick link and tighten the safety
screw.
The maximum drop distance must never exceed 20 cm.
A safety rope which already held the strain of a crash or which is defective must not
be used again.
Adjust the desired inclination-angle via the mounting-bracket and tighten the
fixation screws.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved
by an expert!
1.2 Power Connection
!! CAUTION!!
Never leave this device running unattended!! Every person that is involved with
this Item has to be qualified!!
Connect item with the main plug. The voltage and frequency must exactly be the
same
as stated on the device. The power plug must always be inserted without force.
1.3 Cleaning and Maintenance
Please make sure that safety-relating and machine-technical installations are
inspected by a skilled person once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, fixations and installations spots.
3. No damages must be showed on the power supply cables, material fatigue and
sediments.
If the device is going to be cleaned, please use moist, lint free cloths. Never use
