www.squarejellyfish.com
Designed in USA. Made in China. Patent pending.
Square JellyfiSh Pocket triPod uSer’S Manual
Good
Camera is balanced properly
and will not tip.
Good
Camera is balanced properly
and will not tip.
Good
Pocket Tripod is placed
on large, even surface.
Good
Camera is balanced properly
and will not tip.
WronG
Camera is not balanced and
will tip forward.
Good
Camera is balanced properly
and will not tip.
Thank you for purchasing the new Square Jellyfish Pocket Tripod. This
product can be used with any pocket camera with a threaded hole for tripod
mount. Using the unique shape of the Pocket Tripod, your camera can
be positioned at many different angles while holding your camera steady
enough to take a picture. There are a few specific guidelines that you should
follow to make sure that no damage occurs to your camera.
it’s about balance
• First, select a good location to place your Pocket Tripod.
This can be even surface such as a desk, bench or floor.
Make certain the Pocket Tripod is surrounded by a mini-
mum 12” radius area.
• Loosely mount your camera to the Pocket Tripod screw
and then hold and slide your camera in the slot to find the
angle you desire. Gently let go to ensure your camera balances independently
before letting go. If necessary, select a slightly different angle for your camera.
• Finger-tighten the screw to hold your camera securely.
use common sense
• The Square Jellyfish Pocket Tripod
is designed to hold the camera
steady while taking a picture. It is not
designed to be mounted to a moving
object or vehicle.
• Do not place your camera and
Pocket Tripod where it can easily fall
a distance that would cause damage
to your camera. A small railing and
the edge of a cliff are just a few
examples that come to mind.
• This product contains small parts
that may be a chocking hazard.
Keep out of reach of children.
12”
