1
2
3
4
6
5
SET UP YOUR JELLY LONG LEGS TRIPOD
To use the Jelly Long Legs tripod, simply screw the
folded tripod onto the Jelly-Grip Tripod Mount. Once
attached, unfold the legs to their full position.
Confirm that the set-screw is tightened and place the
tripod on any level surface of your choosing.
Alternatively, for
uneven surfaces,
the legs of the
tripod may be
individually
adjusted
for uneven
surfaces. Using
a screwdriver,
loosen the set-
screw, adjust each
leg ad desired,
and retighten the
set-screw.
1
Spring Mount Claws:
Securely
holds smartphones up to 6” in
diagonal
2
Ball Joint:
Securely supports
smartphones in multitude of
angles
3
Mounting Arm:
Balances
smartphone directly over tripod
for remarkable balance
4
¼ x 20 Threaded Mount:
One-point attachment for any
standard tripod
5
3 ¾” Tripod Legs with
Non-Slip Grips:
Tripod
holds strong on a variety of
surfaces. Legs fold for easy
portability
6
Tripod Leg Set Screw:
Position tripod legs
individually if desired
iPhone
sold seperately
JELLY-GRIP
TRIPOD MOUNT
WITH JELLY LONG LEGS
POSITION YOUR SMARTPHONE
Rotate your smartphone into any number of positions
via the Ball Joint. The joint is designed to securely
hold the smartphone in any position it is placed.
The Ball Joint has an adjustable knob allowing you
the flexibility to adjust the tension, if desired.
YOU’RE READY TO TAKE A PICTURE
With this simple two-step set-up you can be ready to
take photos or use FaceTime in a matter of seconds:
1.
Mount smartphone
2. Position smartphone
There’s no need to miss out on a great photo
opportunity ever again.
Set-screw
ATTACH YOUR
SMARTPHONE
Jelly-Grip Tripod
Mount is designed to
hold a smartphone up
to 6” in diagonal.
Flip each of the Jelly-
Grip Spring Mount
Claws open forming
90 degree angles with
the rest of the claw
assembly.
Gently pull the claws
in opposite directions
until your smartphone
easily slides into
place. Release claws.
Tension will hold your
smartphone securely
in the mount.
90°
90°
