8
5.
USING ADDITIONAL FUNCTIONS AND COMMANDS
Please see the below table for different functions and their commands.
Note: if you have changed the password you need to substitute “123456” with your new 6 digit password on all the
below commands.
Instructions
Command
Reply
Sleep mode
Sleep mode saves the battery. The
unit can remain in sleep mode for
up to 8 days and will wake up
when you send it a command.
The default setting will put the
unit to sleep after 5 minutes and
wake up when it is issued a
command.
Send the following command:
sleep123456
sleep ok
Sleep by time
The default setting is 5 minutes
and the unit will go into sleep
mode after 5 minutes of no
activity. If you wish you can
change the time it takes to go to
sleep.
Sleespace+time
Time must be in seconds.
Sleep time ok
No sleep
If you want to use your unit as a
live tracker and monitor its route
through a smartphone app or
website continuously you may
want to disable the auto sleep
function.
The unit will continue to send its
GPS location every few seconds
until either you send it another
command, or the battery runs
out.
In this mode you can have live
tracking up to 15 hours
dependent on signal conditions.
Send the following command:
sleespace+off
sleep off ok
Turn GPRS mode off.
This setting will only provide
location via the SMS text or call
function and will not use GPS
locations. This is not
Nogprs123456
Nogprs ok
