5
ASSEMBLY DIAGRAMS
Holding the feeder tube insert the grinding head
into the gear box
g
, under a slight angle (clock-wise).
B
Rotate the grinding head
counter-clockwise until it
clicks into place.
Insert the feed screw
into the grinding head
,
long end first. Turn it slightly until it sets into place.
Position the desired cutting plate
a
onto the shaft of
the feed screw
. Fit the protrusions on either side of
the cutting plate
a
into the two slots on each side on
the rim of the grinding head
.
Screw the fixing ring
s
firmly onto the grinding
head
. Do not overtighten. Slot the hopper plate
w
onto the feeder tube of the grinding head
and insert
the food pusher
.
Position the square hole on the cutting blade
onto
the square end of the feed screw
. The shar pened
side of the cutting blade
must face outwards (away
from the feed screw
).
Handle carefully, the blades are very sharp!
D
C
A
B
E
F
