STEP 3 – Create an Account and Login
a. You can activate your tracker here: www.spytecinc.com/gps-activation
b. Your login details will be emailed to you.
c. Once you log into your account, you will see the mapping platform where your GL300
will show its location.
3
Important Facts
Standard programming for the GL300 is to update every 3 hours when not moving
and once a minute when moving.
When ON, the Green LED will flash once every 3 seconds.
The Blue Satellite LED is quite random and can generally be ignored.
When powering off, the Red LED will remain on for up to 2 minutes, then power down.
The optional M2 Waterproof Magnetic Case for the GX350 makes placement easy. Buy
it at: www.spytecinc.com/waterproof-magnetic-case-for-gl200-gl300.html
The GL300 can be enabled for international roaming. The default is set to 5-minute
movement updates in many countries outside of the U.S. But in Canada and the U.K.,
the default movement update is once per minute. International roaming is not
available in Japan, Taiwan, South Korea, Australia and Singapore. The GL300 will not
work in the state of Alaska.
a. The GL300 needs to have as much access to the open sky as possible to retain a
connection to the GPS satellites.
b. Tracker cannot be surrounded by metal since it blocks GPS signals. DO NOT hide the
GL300 in metal enclosures. DO NOT place it in the middle of the undercarriage, the
engine compartment, wheel wells, a metal bumper, the trunk, glove compartment, or
any closed / lidded compartment. The best position for the device within a vehicle is
under the driver’s or passenger’s seats.
c. When placing the GL300 under a vehicle, position iton a flat part of the frame towards
the edge of the vehicle with the LEDs on the face of the device facing the pavement.
When you get low to the ground, you should be able to see the device.
STEP 4 – Placement of the Tracker
STI_GL300 REAL-TIME GPS TRACKER USER GUIDE