To Charge the Camera
1. Make sure the On-Off switch is in the Off position.
2. Plug in the mini USB cable to the hat, and plug in the
other end into the computer.
3. The green LED next to the light will turn on to show
that the camera is charging.
4. When the camera is finished charging, the green light
will turn off.
Operating the Camera
1. To use the camera, first, slide the On-Off switch to the
On position.
2. On the remote, press and hold the power button to
put the unit into stand-by mode. You will feel a vibra-
tion in the hat, and the green light will stay on.
3. Press and hold the button on the remote for about
one second. You should feel the hat give 5-6 short
vibrations and the light will flash 5-6 times, then turn
off.
4. To stop recording, press the button on the remote
and hold it for about one second. You should feel the
hat give 2-3 short vibrations and the light will blink
2-3 times. This means the video is being recorded on
internal memory.
5. If you do not begin recording within 10 seconds of
putting the hat in stand-by mode, the device will turn
off again. You will have to press and hold the button
on the remote to enter stand-by mode again.