Spypoint TINY-W2, Руководство пользователя

Страница: 9 / 55

16 17
English
English
PROGRAMMING
Turn on the camera to navigate in the interface by pressing
“
 ” or “  ” and press “OK” for selection. To modify the
selection, press “  ” and “  ” again and press “OK” to
confirm. To return to the previous menu press “

”.
PHOTO
To take pictures. The “Photo” mode must be selected by
pressing “OK”; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
VIDEO
To take videos. The “Video” mode must be selected by
pressing “OK”; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
TEST
To set the camera or the distance. When “Test” mode is
selected, no picture or video is recorded. Walk perpendicularly
in front of the camera. When the camera detects movement,
the light winks to indicate that normally, a photo or video
would have been recorded. If the system does not detect
the movement, increase the distance detection using the
“Settings” menu (the option “Sensitivity” allows the user
to set the sensitivity to “
High ”, “ Medium ” or “ Low ”). You
can also realign the camera differently. Once you understand
how the device responds to detections, you can better adjust
the direction or the height of the camera
(Recommanded
installation height: about 3 feet).
In “Test” mode, it is possible to take a picture by pressing
the “OK” button. The photo is saved and appears in
“View” mode.
SIGNAL
Wireless signal test
The quality of the wireless signal between the TINY-W 2
camera and the Blackbox receiver can be checked on the
camera in “Signal” mode by choosing the “Range Test”
option. If the icon of the wireless signal is red, the signal is
too weak. Bring closer or move the receiver. If the icon of the
wireless signal is green and stays green for at least 10 seconds,
the signal is strong enough and stable to enable wireless
transmission of images to the receiver.
For best results, the
antennas of the two devices must point upwards and their
respective height should be approximately the same.
Note : If the receiver is not powered and synchronized with
the camera , the signal icon remains red.
Manually synchronizing one or multiple sets (TINY-W 2
Blackbox receiver) in the same perimeter
+