16
17
English
English
•
Watching on TV:
You can view the photos or videos directly
from a TV. Connect the yellow end of the cable supplied
into the "VIDEO IN" of the TV and the other end into the
"TV OUT" of the camera. The options are the same as when
viewing on the screen 3.0"(see above).
SOUND RECORDING
This camera SPYPOINT
®
offers the possibility to record the
sound in "VIDEO" mode. When the "VIDEO" mode is selected,
the camera automatically records the sound. On the bottom of
the camera, you can find a rubber cap with the inscription MIC.
If the user does not want to record the sound, the rubber cap
needs to stay in place. If the sound recording is required, the
user must lift the rubber cap and turned it slightly so that the
microphone receiver is completely cleared (See figure below).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera "OFF" and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and install the software itself. Click on
"My Computer" and select "Removable Disk". Then click on
"DCIM" and "100DSCIM" to find all your photos and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TROUBLESHOOTING
No person / animal on photos
1.
Rising sun or sunset can trigger the sensor. Camera
must be re-orientated.
2.
At night, motion detector may detect beyond range
of the IR illumination. Reduce distance setting.
3.
Small animals may trigger the unit. Reduce distance
setting and/or raise height of camera.
4.
Motion detector may sense animals through foliage.
5. If person/animal moves quickly, it may move out
of the camera field of view before photo is taken.
Move camera further back or redirect camera.
Camera must be set on a stable and motionless
object i.e. large tree.
6.
Make sure the mounting post or tree is stable and
does not move.
Red light in front of camera blinks
• Camera is set in TEST mode
• Camera is set in PHOTO or VIDEO mode. The red
light in front of the camera flashes for 60 seconds to
allow the user to leave without being photographed or
recorded.
The camera screen turns off
•
The camera may be set to PHOTO or VIDEO mode and the
screen turns off in order to preserve battery life.
•
The camera is left inactive for more than 2 minutes on the
main menu, it automatically resets itself to PHOTO mode
and the screen turns off.
•
To return to the main screen, turn off the camera and turn
in
on
again.
