Installation with the supplied strap
The dimensions of the included strap are 2.5 cm (1’’) X 152 cm (60’’).
Thread the strap through the strap slot found on the back of the camera.
Wrap the strap around the tree then press and hold down the latch.
Thread the strap through the latch from behind, as shown below.
installation, mounting bracket and updates / 11
Camera software updates
Go to
https://support.spypoint.com/EN
for instructions on how to perform
camera software updates.
installation
Recommended installation height
The camera should be installed at the same height as the animal's mid-body.
Ideal installation for quality images and videos
The targeted animal should be 7.5 m (25 ft.) away from the camera for a better
field of view.
To achieve brighter pictures at night, there should be elements in the back-
ground that can reflect the camera's infrared light. Take note that the camera
should not be facing directly toward the sun as this may create backlighting and
trigger false detections.
Make sure the front of the camera is free of any obstruction. The installation area
must be clear of branches or bushes as they could trigger false detections when
combined with heat, reflections, and/or wind. If the camera's sensitivity is set to
High, this could also trigger false detections.
mounting bracket
To remove the camera from the mounting bracket:
Push the tab to release the
camera from the mounting bracket.
Remove the camera.
or