Spypen Luxo, Руководство пользователя

Страница: 16 / 38

16
8.4 Self-Timer Mode
To use the self-timer feature, press the Mode Button until appears in the LCD then
press the Shutter Button to start a 9 seconds self-timer. The SPYPEN LUXO will issue
a short beep every second and then a long beep just prior to a further short beep which
indicates that the image has been successfully taken. It is a good idea to use the stand
for this.
Important Note:
The Self-Timer Mode cannot be selected when the SPYPEN LUXO is full.
8.5 Clearing the Stored Images
When you wish to clear the memory of your SPYPEN LUXO , press the Mode Button until
appears on the LCD. Pressing the Shutter Button once will cause the
SPYPEN LUXO
to beep and the
start ashing. Pressing the Shutter Button again within 5 seconds
will clear all the images stored and reset the image counter.
Important Note:
• Individual images cannot be cleared
• All images will be lost when the memory is cleared. Please make sure you upload your wanted images
before clearing your SPYPEN LUXO ’s memory.
8.6 Changing the Image Resolution
Image resolution can be changed whenever you need.
1. Cycle through the Mode options by pressing the Mode Button.
2. Press the Shutter Button once to change to the alternative resolution.
For Example:
Changing from Hi-Res Mode to Low-Res Mode:-
Press the Shutter Button to Conrm
Changing from Low-Res Mode to Hi-Res Mode:-
Press the Shutter Button to Conrm