Assembly Instructions
2.
Place Hopper Assembly
onto Frame (2).
Note: The Rate Gate
Control Lever (4) & the
Accuway® Control
Lever (5) go under the
frame cross brace.
3.
Bolt Hopper Assembly to
frame (2) using 4 bolts
(6) with 4 nylon washers
(7) and 4 nuts (8).
3
1.
* For model 120, skip to step 4
Insert Bump Bar (1) into
Frame (2), but do not bolt
together at this time.
For Quick and Easy Assembly - First Read Entire Procedure
Then Follow Carefully The Step by Step Instructions
Assembly Instructions
2
Parts for Models:120
• (1)
Lever Control Tube Brace
• (1)
Bolt - Control Brace to Hopper 1/4-
20 x 3/4"
• (3)
Bolt - Control Brace to Control Tube
& Levers to Control Tube 1/4-20 x
1 1/2"
• (2)
Bolt - Lever Control Tube to Hopper
• (6)
Lock Nut
• (3)
Nylon Washer
• (1)
Plastic End Cap / Control Tube End
• (1)
Hex Key for Spinner Shaft Coupler
• (2)
Hopper Bottom Bearing "for
Replacement"
Parts for Models: 220
• (6)
Bolt - Hopper to Frame & Control
Tube to Hopper, 1/4-20 x 2"
• (2)
Bolt - Deflector Shield to Frame 1/4
-20 x 13/4"
• (1)
Bolt - Control Brace to Hopper 1/4-
20 x 3/4"
• (3)
Bolt - On/Off Levers to Control Tube
& Brace to Control Tube 1/4-20 x 1
1/2"
• (12)
Lock Nut
• (1)
Lever Control Brace
• (1)
Spinner Clip
• (1)
Spinner Shaft
• (1)
Spinner / Grey Plastic
• (1)
Mulch Spinner
• (1)
Hex Key for Spinner Shaft Coupler
• (2)
Hopper Bottom Bearing "for
Replacement"
• (9)
Nylon Washer
• (1)
Plastic End Cap / Control Tube
• (1)
Small Parts Bag with Agitator & Felt
Washer for use with grass Seed
• (2)
Set Screw 1/4-20 x 3/8" Allen for
Spinner Shaft Coupler
• (2)
Plastic End Cap / Frame
• (1)
Coupler for New Motor Shaft
Tools you will need:
Medium Sized Flathead Screwdriver, Pliers and 7/16” & 3/8” wrenches
Parts you will use:
