Spyder Electra with Eye TADAO EDITION, Руководство пользователя

Страница: 3 / 15

1 2
English
IMPORTANT SAFETY GUIDELINES
WARNING
• This paintball marker is NOT a toy. Misuse can cause serious injury or death.
• Kingman recommends that the customer be at least 18 years of age to purchase this product.
Person under 18 years of age must have adult supervision when using this product.
• Read this User manual before using this product.
• Any modifications or tampering of original factory parts or use non authorized aftermarket
accessories will void all warranties and liabilities from Kingman.
• Keep the barrel blocking device on the marker when not shooting/ playing.
• To ensure proper adjustment of velocity Feet per Second (fps), Kingman strongly recommends
using a chronograph for paintball use located or purchased at most paintball stores and paintball
fields. The discharges of paintballs are high velocity and high impact that can cause serious
injuries or death if misused.
• Before / after use of the marker, check and make sure all screws are securely tightened. Loose
screws may prevent the maker from functioning properly. A paintball marker NOT properly
maintained can be dangerous and can cause serious injury or death.
• Any person using this product or within range of this product while it is in use MUST wear
EYES/FACE/EARS PROTECTION designed specifically for the sport of paintball. This includes,
but is not limited to, performing a maintenance/ velocity check and during target practice.
• Kingman reminds the user that SAFTY IS YOUR RESPONSIBILITY. Protect your eyes/face
and ears at all times, and will not be held liable for injuries or death sustained when failing to
follow all safety guidelines.
• Never shoot or point your marker at a person that is not in a designated paintball facility and
without proper paintball EYES/FACE/EARS PROTECTION. The protection includes and not
limited to the protection of eyes, face, ears, neck. and head. Avoid shooting underneath the
paintball goggles
• DO NOT point or shoot at any Law Enforcement Officer.
• Treat every paintball marker as if it were loaded.
• Never look down the barrel of a loaded or unloaded marker.
• Always keep the paintball marker in SAFE or OFF mode until ready to operate.
• Always remove the air source and all paintballs from the marker, includes paintballs inside the
breach of the marker before disassembly.
• Fire only 0.68 caliber paintballs with this product.
• Always make certain the bolt of the marker is in the un-cocked position when not shooting/
playing.
• Using a paintball marker outside of a non designated paintball facility can be illegal, and is
• subject to law enforcement penalties if property damage is caused by the user.
• Never point or shoot your marker at an animal.
• Never point the barrel toward yourself while playing or running to avoid shooting underneath
your paintball goggles.
• Wear appropriate dress to avoid any exposure of skin to protect you when playing paintball
games.
• Transfer this User Manual upon change of marker ownership.
• Please visit www.spyder.tv for any latest User Manual updates.
OPERATION GUIDE / START UP
1.
Always attach a barrel blocking device over the tip of the barrel for safety precautions when not shooting/ playing.
2.
Install and charge the battery see pages (See Battery Installation / Charging). CAUTION: Make sure the marker is in
off/safe mode.
3. Attach a CO2 / Compressed Air Tank to the C/A Adapter. HELPFUL TIP: Make sure to have the CO2 / Compressed
Air Tank filled before attaching to the marker. Hand tightens the tank clockwise in the markers C/A adapter until it is
snug. If an air leak occurs between the tank and the C/A adapter, replace the urethane O-ring.
NOTE: O-rings in the
markers parts kit are not supplied to attach with a CO2 / Compressed Air Tank. IMPORTANT: You should never need
to use any hand tool to attach a CO2 / Compressed Air Tank to the C/A adapter. (See CO2/Compressed Air Tank
Warning)
4. Attach an electronic paintball loader to the markers clamping Feed Neck and tighten the set screw. Only use .68
caliber paintballs through the electronic loader.
NOTE: Kingman recommends that you use a force feed / high speed
electronic loader to reach optimum performance.
5. Turn Power On for the electronic trigger frame (See Tadao® Circuit Board Settings).
6. Cocking the marker. Pull the Top Cocking Knob rearward until the Delrin Bolt latches. CAUTION: Should you let go of
the Top Cocking Knob before it latches, your marker may fire.
7.
Remove the barrel blocking device over the barrel. CAUTION: With the power switch turned ON the marker is
ready to play. Pulling the trigger will fire a paintball. IMPORTANT: Only test your marker in a safe direction or in a
designated playing field.
8. Performing a velocity (fps) check. Turning the velocity adjuster & spring guide clockwise will increase the velocity
(fps) while turning counter-clockwise will decrease the velocity (fps).
NOTE: Your marker is intended to be used in
a paintball facility with the proper paintball protection. IMPORTANT: Kingman recommends using a chronograph to
ensure that the marker’s velocity is under 300 (fps).
9.
When finished playing, remove all paintballs from the paintball loader before detaching from the markers feed neck
by loosening the set screw on the clamp.
CAUTION: There may be paintballs in the marker’s breach; take a couple of
shots in a safe direction to make sure the barrel and receiver are empty.
10. Place the barrel blocking device over the barrel tip. This will help avoid any accidental discharge.
11. The marker must be in the “SAFE or OFF” and un-cocked position after shooting / playing.
12. Unscrew the CO2 / Compressed Air Tank from the marker’s C/A adapter. Firmly hand loosens the tank counter-
clockwise to detach it from the marker’s C/A adapter.
CAUTION: Never expose any skin underneath the C/A
adapters bleed hole when removing the tank. This can run the risk of getting skin burn from the releasing of the
GAS.
IMPORTANT: You should never need to use any hand tool to detach a CO2 / Compressed Air Tank. (See
CO2/Compressed Air Tank Warning)
13. Store the marker in a paintball bag or in a safe place. WARNING: Before / after use of the marker, make sure to
fasten all screws. Loose screws may prevent the marker from functioning properly. HELPFUL TIP: It’s a good
practice to lubricate your marker before and after each use, especially when storing the marker for an extended
period of time. Add a few drops of paintball gun oil on the Striker O-ring (see Disassemble / Reassemble). Before
storing the marker, make sure the marker is powered OFF or on SAFE MODE, un-cocked position without air source
attached, any paintball inside the marker has been removed and with barrel blocking device on..
IMPORTANT
• Firing velocity may vary according to altitude and climate conditions.
• It may be dangerous approximately within 300 Feet (100 meters) of shooting range.
• Before using your marker in play, you must always first perform a “SAFE VELOCITY TEST”. This can only be
accomplished by using a testing device called a “Velocity Chronograph“ and can be performed at a paintball dealership
or local playing field.
NOTE: This product is intended to be used at a velocity no greater than 300 feet per second
(fps). Paintball markers are not intended to shoot within 30 feet
• This paintball marker may have excess gas after the removal of the CO2 / Compressed Air Tank. Please remove all
paintballs and discharge the remaining gas safely.
• Never store a CO2 / Compressed Air Tank attached on the marker.