8/16
Climate Page Continued
Figure 4 (Fan Control)
▪
This section allows control of the AC fan. When you run the AC in cooling mode you will be able to
select either Fan High, Fan Low, or Auto. Auto mode will control the fan for you choosing the best
time to switch from High to Low. It is recommended having the fan on high or auto when cooling the
coach with the AC. Running the fan on low with the AC on can cause the AC to prematurely freeze
up.
Figure 5 (Temperature Set Point)
▪
This section allows control over the HVAC set point in the coach. To heat the coach with your
furnace or heat pumps you must first select heat pump or furnace then set your set point above the
current ambient temperature (Fig.1) To cool the coach you must select AC then set your set point
below the ambient temperature (Fig.1)
