Herpstat
1 & H
erpstat 2
User’s Manual
www.spyderrobotics.com
Thank you for choosing the Herpstat digital proportional thermostat. This product
offers the following features:
•
Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target
temperature (usable range from 40˚F to 150˚F or 4˚C to 65˚C).
•
Soft startup slowly applies power during initial warm-ups.
•
Configurable for Heating, Cooling, Lighting, and Humidity.
•
Lighting can simulate sunrise/sunset and moonlight.
•
User selectable temperature and light ramping allows day to night changes to occur slowly.
•
Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
•
Auto Power Matching constantly adjusts the power output curve to match the enclosures efficiency.
•
Individually selectable day/night schedules with nighttime temperature settings for each output.
•
High/Low temperature tracking helps monitor heating system and enclosure efficiency.
•
Individually selectable High/Low temperature threshold alarms.
•
Precision temperature sensors with an internal resolution of .1125 ˚F and are accurate to ± .9 ˚F
•
Display and setting in tenths of a degree.
•
Security Passcode option deters vandals.
•
All settings are retained in memory even if power is lost.
•
Power Outage detection/tracking.
•
Temperature can be set/displayed in Fahrenheit or Celsius.
•
Easy to read backlit LCD display.
•
Removable sensors allow for easy replacement if necessary.
•
User replaceable fuse.
•
Audible alarm system
•
Internal error detection shuts off heat if sensor fails or is disconnected.
•
Internal safety relay cuts power to all outputs if user settable conditions are met.
•
700 total watt output for the Herpstat 1
•
900 total watt output for the Herpstat 2
•
1 year limited warranty
