Main Features
Device connection
Common Problems and Troubleshooting
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
2.Installation should be proceed by professional service and follow
manufacturer’s instructions, do not dismantle without authoriza
tion.
3.In order to prevent sensor ,do not expose lens to intense light
source in long time.
4.Do not touch sensor directly. Please covers the dustproof cover
when the camera is not being used.
5.Please use a dry soft cloth to clean the camera. If dirt difficult to
clean, use detergent with water and wipe dry the camera.
6.Do not install camera under air conditioning’s air gate ,or else
lens blur with condensation of moisture.
7.Please ensure that all electric power sources are turned off
when not open , installation ,clean, etc operation.
8.Please transporting , using and storing the camera in allowable
temperature and humidity.
9.If the camera was broken, for example power cord or plug dam-
aged,Splash liquid or foreign matter fall into camera, raining,
wetting, etc can’t work situation, please contact manufacturer
or maintenance center (modify and maintenance without perm
ission, you must be responsible for the problems).
Safety instruction
>
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color camera
can get high definition picture in low Lux condition.
>
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach
1/100,000
s.
>
OSD button shortcut functions
CVBS
MODE: hold
left
key
5s.
AHD MODE : hold
right
key
5s
.
System switching : hold down
key
5s
.
>
OSD MENU
MAIN
MENU
LENS
MANUAL/DC
EXPOSURE
SHUTTER
AUTO,1/30,1/60,FLK,1/240,1/480,1/1000,
1/2000,1/5000,1/10000,1/50000,X2,X4,X6,X8
,X10,X15,X20,X25,X30
AGC
0
－
15
SENS-UP
AUTO(X2-X30)/OFF
BRIGHT-
NESS
0-100
D-WDR
OFF/ON
DEFOG
OFF/AUTO
BACK LIGHT
OFF
BLC:LEVEL/AREA /DEFAULT
HSBLC:SELECT AREA/DISPLAY/BLACK MASK/LEVEL/
MODE/DEFAULT
WHITE BAL.
ATW/AWC
→
SET/INDOOR/OUTDOOR/MANUAL/AWB
DAY &
NIGHT
EXT
D
→
N(DELAY)/N
→
D(DELAY)
AUTO
D
→
N(AGC)/D
→
N(DELAY)
/N
→
D(AGC)/N
→
D(DELAY)
COLOR
B/W
BURST/IR SMART/IR PWM
NR
2DNR
OFF/LOW/MIDDLE/HIGH
3DNR
OFF/LOW/MIDDLE/HIGH
SPECIAL
CAM TITLE
OFF/ON
D-EFFECT
FREEZE/MIRROR/NEG.IMAGE
MOTION
SELECT AREA1-4/DISPALY/SENSITIVITY
/COLOR/TRANS/ALARM/DEFAULT
PRIVACY
OFF/ON
LANGUAGE
ENG/CHN1/CHN2/GER/FRA/ITA
/SPA/POL/RUS/POR/NED/TUR
DEFECT
LIVE DPC
WHITE DPC
BLACK DPC
RS485
CAM ID:0-255
ID DISPLAY
BAUDRATE:2400/4800/9600/19200/38400
ADJUST
SHARPNESS
AUTO/OFF
MONITOR
LCD/CRT
LSC
OFF/ON
VIDEO.OUT
PAL/NTSC
>
No Picture after providing power
May be the power supply voltage abnormity, please check
he power supply voltage and pole
whether exactitude
.
Please check all the connecting cable and monitors whether
be connected correctly or not
.
>
The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, it need filter
the wave of the power supply
.
Check the monitor and peripheral equipments used.
>
The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
>
The picture smear too mass
The power supply’s voltage unstable
.
Connecting cables not connect correctly or have high
impedance.
Note
:
• Power supply must pass safety certification ,Its output
voltage, current, voltage polarity and operating temper-
ature must match requirement of this equipment.
• Please install lightning protection devices or cut off the
power in thunder and lightning
conditions.
• To capture high-quality video and pictures, please make
sure the network connection is stable and smooth.
• Please note the camera’s operating temperature and its
using environment
requirement. Avoid using the camera
at too high or too low temperatures. The operating tem-
perature is
-30
~
+
60℃
. (Recommendatory operating tem-
perature is
-10
~
+50℃.)
• Do not mount the camera near by the radiator
or heater.
